 |
 |
 |
 |
|
 |
|
|
|
|
The following document gives you an overview of cutting capacities for each type of technology available at CBR Laser Inc. New ferrous or non-ferrous materials can be added to this list. For more details, please contact us.
All of these values apply to the following materials :
Steel, Stainless Steel, Aluminum, Wood, Glass, Phenolics, Bitumen
All of these values apply to the following materials :
Steel, Stainless Steel, Aluminum, Wood, Glass, Phenolics, Bitumen
| Thickness | Minimum Diameter | Tolerance | |
|---|---|---|---|
| 26ga | 0,020 | ± 0,005" |  |
| 24ga | 0,020 | ± 0,005" | |
| 22ga | 0,025 | ± 0,005" | |
| 20ga | 0,030 | ± 0,005" | |
| 18ga | 0,035 | ± 0,005" | |
| 16ga | 0,040 | ± 0,005" | |
| 14ga | 0,050 | ± 0,005" | |
| 12ga | 0,070 | ± 0,005" | |
| 1/8 | 0,080 | ± 0,005" | |
| 3/16 | 0,125 | ± 0,005" | |
| 1/4 | 0,187 | ± 0,005" | |
| 5/16 | 0,250 | ± 0,005" | |
| 3/8 | 0,250 | ± 0,005" | |
| 1/2 | 0,375 | ± 0,005" | |
| 5/8 | 0,437 | ± 0,005" | |
| 3/4 | 0,500 | ± 0,005" | |
| 1 | 0,750 | ± 0,008" |
| Thickness | Minimum Diameter | Tolerance | |
|---|---|---|---|
| 7/8 | 0,875 | ± 0,060" |  |
| 1 | 1,000 | ± 0,060" | |
| 1¼ | 1,250 | ± 0,060" | |
| 1½ | 1,500 | ± 0,060" | |
| 1¾ | 1,750 | ± 0,060" | |
| 2 | 2,000 | ± 0,080" | |
| 2½ | 2,500 | ± 0,080" | |
| 3 | 3,000 | ± 0,080" | |
| Thickness | Minimum Diameter | Tolerance | |
|---|---|---|---|
| 26ga | 0,040 | ± 0,020" |  |
| 24ga | 0,040 | ± 0,020" | |
| 22ga | 0,040 | ± 0,020" | |
| 20ga | 0,040 | ± 0,020" | |
| 18ga | 0,045 | ± 0,020" | |
| 16ga | 0,055 | ± 0,020" | |
| 14ga | 0,064 | ± 0,020" | |
| 12ga | 0,090 | ± 0,020" | |
| 1/8 | 0,063 | ± 0,020" | |
| 3/16 | 0,094 | ± 0,020" | |
| 1/4 | 0,125 | ± 0,020" | |
| 5/16 | 0,136 | ± 0,020" | |
| 3/8 | 0,188 | ± 0,020" | |
| 1/2 | 0,250 | ± 0,020" | |
| 5/8 | 0,313 | ± 0,020" | |
| 3/4 | 0,375 | ± 0,020" | |
| 7/8 | 0,438 | ± 0,020" | |
| 1 | 0,500 | ± 0,020" | |
| 1¼ | 0,625 | ± 0,040" | |
| 1½ | 0,750 | ± 0,040" | |
| 1¾ | 0,875 | ± 0,040" | |
| 2 | 1,000 | ± 0,060" | |
| 2½ | 1,250 | ± 0,080" | |
| 3 | 1,500 | ± 0,080" | |
| 4 | 2,000 | ± 0,080" |
| Thickness | Minimum Diameter | Tolerance | |
|---|---|---|---|
| 26ga | 0,063 | ± 0,020" | |
| 24ga | 0,063 | ± 0,020" | |
| 22ga | 0,063 | ± 0,020" | |
| 20ga | 0,063 | ± 0,020" | |
| 18ga | 0,063 | ± 0,020" | |
| 16ga | 0,063 | ± 0,020" | |
| 14ga | 0,063 | ± 0,020" | |
| 12ga | 0,063 | ± 0,020" | |
| 1/8 | 0,063 | ± 0,020" | |
| 3/16 | 0,094 | ± 0,020" | |
| 1/4 | 0,125 | ± 0,020" | |
| 5/16 | 0,156 | ± 0,020" | |
| 3/8 | 0,188 | ± 0,020" | |
| 1/2 | 0,250 | ± 0,020" | |
| 5/8 | 0,313 | ± 0,020" | |
| 3/4 | 0,375 | ± 0,020" | |
| 7/8 | 0,438 | ± 0,020" | |
| 1 | 0,500 | ± 0,020" | |
| 1¼ | 0,625 | ± 0,040" | |
| 1½ | 0,750 | ± 0,040" | |
| 1¾ | 0,875 | ± 0,040" | |
| 2 | 1,000 | ± 0,060" | |
| 2½ | 1,250 | ± 0,080" | |
| 3 | 1,500 | ± 0,080" | |
| 4 | 2,000 | ± 0,080" |
Waterjet : This waterjet cut part would be entirely cut only at a thickness of 3/8" or less
Laser : At a thickness of ½", the first hole would be absent from the cut
Laser : At a thickness of ¾", the first hole would be absent from the cut
Flame Cut : At a thickness of 1", the holes and the slot would be absent from the cut except the 2 largest ones